LSC Lighting Systems

In smaller installations where cost is a major factor, providing a dimmer channel for each outlet in the venue is unlikely to be viable. This is where the patch bay comes in.

In this scenario each of the outlets in the rig is hard-wired back to a central patch bay that provides a flying lead systems located next to the dimmers. In this way, depending on the show, the lights required can be chosen from the patch bay and plugged into the dimmer offering a degreee of flexibility that could not be achieved easily in any other way.

The Redback Patch Bays have been designed to compliment the Redback Wallmount series of installation dimmers/relays. Utilising the same styling methods, the result is a highly compact series of patch bays, that offer the installer and user unhindered access and ease of use.

The system is modular and based on modules of 12-circuits each with a choice of either Australian "piggy back" style plugs as shown in the photo on the right or Wieland GST18 connectors for countries where the Australian style connector is not suitable.

The optional digital Test Module caps off the product group by adding safe and reliable load and source testing with overload indicators and circuit protection. An added bonus of using this module is the provision of an outlet for an LED gooseneck light ensuring there is enough light in the area to see what you are doing.

Description

The Redback Patch Bay starts with a frame. Three frame sizes are offered allowing for systems up to 36, 72 or 120 circuits respectively. Each patch module provides 12 circuits each individually terminated in a connector strip. The unique mechanical design of the patch modules allow them to be clipped in an angled down position exposing the terminals and access to the internal cables. This makes wiring of the modules easy and means that it is not necessary to try and support the module while you try and terminate the cables.

A frame size larger than initially required may be used to allow for future expansion. The required number of 12-circuit patch modules are fitted with the empty locations filled with blank panels.

An optional 1RU Test Module is available and permits testing of both lamp circuits and dimmer circuits. A simple load indicator shows the operator the level of load connected to alleviate possible overloading of the dimmer circuit. It is also useful to confirm that the connected lamps are in fact operating.

The frame is of similar design and construction as the Redback Wallmount and the ability to invert the Redback Wallmount units means that for ease of use in larger systems the dimmers can be located either side of a Redback Patch Bay.

The optional cable management clips are purchased as pairs and help in arranging unused cables to aid in access to the required patch leads.

Already got a rack cabinet? No problem, each of the Redback Patch modules is pre-punched so that they can be fitted into a standard 19" rack.

Features

Redback Patch Bay Features

Three frame sizes for a maximum of 36, 72 or 120 circuits
Modular design - buy what you want when you need it.
12-circuit modules.
Australian 3-pin "piggy back" plugs or Wieland GST18 connectors.
Mates ideally with the Redback Wallmount range.
Optional test module provides a dummy load to test dimmer circuits and a load meter to test lamp circuits.
Unique construction makes wiring modules in place a breeze.
Modules can also fit into a standard 19" rack frame.
Light weight.
Optional cable management clips help keep the cabling tidy.
Wall mountable and easy to install.
Designed and manufactured in Australia by an Australian Owned company.

Specifications

Redback Patch Bay Specifications

		Redback Patch Bay Modules
Patch Module
Circuits per module:		12
Max Load per circuit:		10Amps
Power Connector:		Each lead has 1 x Australian "piggy back" plug (RBP/A) or one GST18 connector (RBP/G)
Lead length:		1,350mm
Product Dimensions - W x D x H:		19" x 2RU (88mm)
Shipping Dimensions - W x D x H (when shipped separately):		TBA
Product Weight (Packed) (when shipped separately):		5kg.
Shipping Weight (when shipped separately):		5kg.
Test Module
Power Supply for Test Module:		Nominal 220-240 Volts single phase 50-60Hz
Test Load:		25W Max duration 1 minute.
Test Load overload protection:		Inbuilt thermal auto resetting fuse
Test Outlet:		Australian 3-pin (RBP/T) or 3-pin GST18 connector (RBP/G/T)
Test Outlet overload protection:		Inbuilt thermal 10A Thermo magnetic MCB
Worklight:		LED 12V @ 50mA
Product Dimensions - W x D x H:		19" x 1RU (44mm)
Shipping Dimensions - W x D x H (when shipped separately):		510 x 190 x 65 mm
Product Weight (Packed) (when shipped separately):		3kg.
Shipping Weight (when shipped separately):		5kg.

	Patch Bay F3	Patch Bay F6	Patch Bay F10
Maximum Circuits per Bay	36	72	120

Product Dimensions - W x H x D	515 x 418 x 120 mm	515 x 685 x 120 mm	515 x 1040 x 120 mm
Product Dimensions - W x H x D	20.3 x 16.5 x 4.7 inches	20.3 x 27.0 x 4.7 inches	20.3 x 41.0 x 4.7 inches
Shipping Dimensions - W x D x H	540 x 440 x 220 mm	540 x 700 x 220 mm	540 x 1060 x 220 mm
Shipping Dimensions - W x D x H	21.3 x 17.3 x 8.7 inches	21.3 x 27.6 x 5.9 inches	21.3 x 41.8 x 5.9 inches
Product Weight (Packed):
Empty (includes 1RU panels top and bottom)	5.0 kg	6.5 kg	9.0 kg
Fully Loaded (max number of circuits loaded)	20.0 kg	35.0 kg	67.0 kg
Shipping Weight:
Empty (includes 1RU panels top and bottom)	14.0 kg	21.0 kg	32.0 kg
Fully Loaded (max number of circuits loaded)	20.0 kg	35.0 kg	67.0 kg

Downloads

	Redback Patch Bays
Product Codes - Australian Connectors
Product Codes - GST18 Connectors	Not yet available
Installation Manual
Line Drawings
Specifiers Info	Not yet available

Ordering Codes

Redback Patchbay Product Codes:

Redback Patch Bay Codes - Australian Connectors
RBP/12		Redback Patch Bay with 12 patch leads (expandable to 36 ccts).
RBP/12/T		Redback Patch Bay with 12 patch leads (expandable to 36 ccts) with Digital Test Module.
RBP/24		Redback Patch Bay with 24 patch leads (expandable to 36 ccts).
RBP/24/T		Redback Patch Bay with 24 patch leads (expandable to 36 ccts) with Digital Test Module.
RBP/36		Redback Patch Bay with 36 patch leads (not expandable).
RBP/36/T		Redback Patch Bay with 36 patch leads (not expandable) with Digital Test Module.
RBP/48		Redback Patch Bay with 48 patch leads (expandable to 72 ccts)
RBP/48/T		Redback Patch Bay with 48 patch leads (expandable to 72 ccts) with Digital Test Module.
RBP/60		Redback Patch Bay with 60 patch leads (expandable to 72 ccts)
RBP/60/T		Redback Patch Bay with 60 patch leads (expandable to 72 ccts) with Digital Test Module.
RBP/72		Redback Patch Bay with 72 patch leads (not expandable).
RBP/72/T		Redback Patch Bay with 72 patch leads (not expandable) with Digital Test Module.
RBP/84		Redback Patch Bay with 84 patch leads (expandable to 120 ccts)
RBP/84/T		Redback Patch Bay with 84 patch leads (expandable to 120 ccts) with Digital Test Module.
RBP/96		Redback Patch Bay with 96 patch leads (expandable to 120 ccts)
RBP/96/T		Redback Patch Bay with 96 patch leads (expandable to 120 ccts) with Digital Test Module.
RBP/108		Redback Patch Bay with 108 patch leads (expandable to 120 ccts)
RBP/108/T		Redback Patch Bay with 108 patch leads (expandable to 120 ccts) with Digital Test Module.
RBP/120		Redback Patch Bay with 120 patch leads (not expandable).
RBP/120/T		Redback Patch Bay with 120 patch leads (not expandable) with Digital Test Module.

Redback Patch Bay Codes - GST connectors
RBP/12/G		Redback Patch Bay with 12 GST18 patch Leads (expandable to 36 ccts).
RBP/12/G/T		Redback Patch Bay with 12 GST18 patch Leads (expandable to 36 ccts) with Digital Test Module.
RBP/24/G		Redback Patch Bay with 24 GST18 patch Leads (expandable to 36 ccts).
RBP/24/G/T		Redback Patch Bay with 24 GST18 patch Leads (expandable to 36 ccts) with Digital Test Module.
RBP/36/G		Redback Patch Bay with 36 GST18 patch Leads (not expandable).
RBP/36/G/T		Redback Patch Bay with 36 GST18 patch Leads (not expandable) with Digital Test Module.
RBP/48/G		Redback Patch Bay with 48 GST18 patch Leads (expandable to 72 ccts)
RBP/48/G/T		Redback Patch Bay with 48 GST18 patch Leads (expandable to 72 ccts) with Digital Test Module.
RBP/60/G		Redback Patch Bay with 60 GST18 patch Leads (expandable to 72 ccts)
RBP/60/G/T		Redback Patch Bay with 60 GST18 patch Leads (expandable to 72 ccts) with Digital Test Module.
RBP/72/G		Redback Patch Bay with 72 GST18 patch Leads (not expandable).
RBP/72/G/T		Redback Patch Bay with 72 GST18 patch Leads (not expandable) with Digital Test Module.
RBP/84/G		Redback Patch Bay with 84 GST18 patch Leads (expandable to 120 ccts)
RBP/84/G/T		Redback Patch Bay with 84 GST18 patch Leads (expandable to 120 ccts) with Digital Test Module.
RBP/96/G		Redback Patch Bay with 96 GST18 patch Leads (expandable to 120 ccts)
RBP/96/G/T		Redback Patch Bay with 96 GST18 patch Leads (expandable to 120 ccts) with Digital Test Module.
RBP/108/G		Redback Patch Bay with 108 GST18 patch Leads (expandable to 120 ccts)
RBP/108/G/T		Redback Patch Bay with 108 GST18 patch Leads (expandable to 120 ccts) with Digital Test Module.
RBP/120/G		Redback Patch Bay with 120 GST18 patch Leads (not expandable).
RBP/120/G/T		Redback Patch Bay with 120 GST18 patch Leads (not expandable) with Digital Test Module.
Modules — can be used in 3rd party 19” enclosed rack cabinets or to expand existing installations
RBP/T		Redback Patch 1RU Digital Test Module complete with Australian 10A test outlet and MCB, 50W test load and Ammeter.
RBP/A		Redback Patch 2RU Patch Panel comprising 12 leads and moulded 3-pin piggy-back connectors. (requires a RBP/B1 below bottom module in rack)
RBP/G/T		Redback Patch 1RU Digital Test Module complete with GST18 10A test outlet and MCB, 50W test load and Ammeter.
RBP/G		Redback Patch 2RU Patch Panel comprising 12 leads and moulded GST18 connectors. (requires a RBP/B1 below bottom module in rack)
RBP/B1		Redback Patch 1RU Blank Module.
RBP/B2		Redback Patch 2RU Blank Module.
RBP/CMS		Redback Patch Cable Management System for 12 patch leads.
RBP/F3		Redback Patch Small Wall Mount Patch Frame, ready to take up to three 12 circuit Patch Modules (max 36 circuits) and a Test Module
RBP/F6		Redback Patch Medium Wall Mount Patch Frame, ready to take up to six 12 circuit Patch Modules (max 72 circuits) and a Test Module
RBP/F10		Redback Patch Large Wall Mount Patch Frame, ready to take up to ten 12 circuit Patch Modules (max 120 circuits) and a Test Module

Images

Redback Patch Bays

Redback Patch Bay 24 circuits fitted into a 36 way frame with test module.				Redback Patch Bay 36 circuits fully populated frame without test module.

36 circuit frame empty. Supplied standard with 1RU fill panes at top and bottom.				Redback Patch top view showing knockouts and mounting flanges.

12 circuit patch module. two versions available - one with Australia 3-pin connectors and the other with GST connectors on it. The Australian model is shown here.				12 circuit patch module shown clipped to the frame and ready for termination.

Redback Patch test circuit module (Australian 3-pin model shown)				Redback Patch test circuit module fitted to top of patch bay frame.

Redback Patch cable management clips				Redback Patch showing cable management clips fitted and in use.

Redback Patch Bay 120 circuit full loaded without test module.