The TEKO wallmount is the newest addition to the EKO/TEKO family of dimmer/switching racks. It provides all the advanced features as standard (including LNET, circuit breaker monitoring and TruPower) in a compact, wallmount chassis with front-mounted outlet sockets.

The removable rear box makes installation easier, as it can be mounted to the wall without the contractor needing to support the weight of the complete dimmer rack.

The TEKO wallmount is available in standard and high Rise Time variants.

  iTEKO 12 channel hpm front

Each circuit on the TEKO wallmount is protected by an RCBO (combination MCB + 30mA RCD) protection, rated at either 10A or 25A. Optional Neutral disconnect MCBs can be provided where RCDs are not desirable.

The TEKO wallmount offers a sophisticated touchscreen user interface with many advanced features. The LNET interface provides the ability to connect the TEKO wallmount to the extensive range of wall-plate controllers and BMS interface modules, as well as the Houston system monitoring and configuration software.

Features

  • Dimmer and power distribution
  • RCBO per channel
  • DMX and memory modes – control via DMX or wall-plate control of internal memories
  • RDM – Remote Device Management enabled
  • Operates on mains input voltages between 90V and 260V phase to Neutral
  • 320 x 240 graphical touchscreen user interface
  • Visual alarms for Phase Fail, over-temperature and loss of DMX
  • PTFD (Pulse Transformer Fired Dimming)
  • Local rigger's control
  • Auto fan control (user defined)
  • Large red/green status LED for instant notification of faults

TEKO wallmount is equally at home in any of the following environments:

  • Dimming conventional, LED and neon lights
  • Powering moving lights
  • Powering LED fixtures
  • Theatre
  • Film
  • Television

Specifications

TWM Specifications

 TWM12/10TWM6/25
Channels
12 6
Max Load per Channel
10 Amps 25 Amps
Thermal Magnetic Breakers
alt alt
RCD/GFI Protection
alt alt
RCD/GFI Current Trip
30mA/Channel
DMX-512A Input with RDM Functionality
alt alt
Control Surface
320x240 graphical LCD touchscreen
Min and Max Trip Levels per Channel
alt alt
Remote Monitoring and Control via LNET and RDM
alt alt
80 Internal Memories
alt alt
Auto-Switch between DMX and Memory Modes
alt alt
Visual Alarms for Phase Fail, Over-Temperature and Loss of DMX
alt alt
PTFD (Pulse Transformer Fired Dimming)
alt alt
Local Rigger's Control
alt alt
Fan Control
Automatical variable speed thermally controlled
Dimming and TruPower Switching per Channel
alt alt
Dimming Curves
6
Operating Temperature Range
0-40oC
Output Connector Options
/A 12 x 3-pin 15A Australian outputs 6 paired Australian outputs (20A + 15A per channel)
/T Hardwired
Power Supply
Nominal 100-240V, 3-phase star with fully rated Neutral, 50-60Hz,
operating range typically 90-260V, 45-65Hz,
earthing system: TN-S.
Power Input Connection
An M25 nickel-plated, brass cable gland for installing power cable is supplied but not fitted.
Control Input
DMX512 (1990) or DMX512-A (E1-11) and RDM (E1-20) via right-hand side panel mounted 5-pin AXR In and Thru connectors. LNET via dual RJ45 Ethercon connectors on right-side panel.
Product Dimensions - W x D x H
490 x 280 x 250mm
19.3 x 11 x 9.8 inches
Shipping Dimensions - W x D x H
 
550  x 340  x 310mm
21.7  x 13.4 x 12.2 inches
Product Weight
15kg/33lb 15kg/33lb
Product Weight (Packed)
20kg/44lb 20kg/44lb
Shipping Weight (Australia)
20kg/44lb 20kg/44lb
Shipping Weight (Export)
20kg/44lb 20kg/44lb

Downloads


Downloads

 
TWM - All Models
Line Drawings

pdf_logo.gif

User Manual

pdf_logo.gif

Software

alt

Consultant Specifications

pdf_logo.gif

Order Codes

Order Codes

12 Channel Dimmers
TWM12/10A
 
TEKO Wallmount 12Ch x 10A - TruPower, RCBO, Circuit Breaker Detect, LNET, 12 x 10A GPO outlets, screw terminals for power input
TWM12/10T
 
TEKO Wallmount 12Ch x 10A - TruPower, RCBO, Circuit Breaker Detect, LNET, hardwired
TWM12/10/H/A
 
TEKO Wallmount 12Ch x 10A - TruPower, RCBO, Circuit Breaker Detect, LNET, high Rise Time, 12 x 10A GPO outlets, screw terminals for power input
TWM12/10/H/T
 
TEKO Wallmount 12Ch x 10A - TruPower, RCBO, Circuit Breaker Detect, LNET, high Rise Time, hardwired
6 Channel Dimmers
TWM6/25A
 
TEKO Wallmount 6Ch x 25A - TruPower, RCBO, Circuit Breaker Detect, LNET, 12 paired 25A/15A GPO outlets, screw terminals for power input
TWM6/25T
 
TEKO Wallmount 6Ch x 25A - TruPower, RCBO, Circuit Breaker Detect, LNET, hardwired
TWM6/25/H/A
 
TEKO Wallmount 6Ch x 25A - TruPower, RCBO, Circuit Breaker Detect, LNET, high Rise Time, 12 paired 25A/15A GPO outlets, screw terminals for power input
TWM6/25/H/T
 
TEKO Wallmount 6Ch x 25A - TruPower, RCBO, Circuit Breaker Detect, LNET, high Rise Time, hardwired
Options
BRKT/UNIS
 
Pair of galvanised hanging brackets to suit P-1000 Unistrut
TAIL40A/S1
 
Optional 3-phase flying lead (1m) fitted with Australian 40A plug
TAIL40A/S2
 
Optional 3-phase flying lead (2m) fitted with Australian 40A plug



Loading...

JoomlaWatch Stats 1.2.9 by Matej Koval