LDT Logo

 

LED DIMMING

Preliminary Information - Please check back often for more up to date information

In acknowledgement of the changing demands of the marketplace, LSC Lighting Systems has introduced a new technology dimmer to allow full control of the majority of dimmable retrofit style LED fixtures

Replacing your existing tungsten fixtures for new LED fixtures can create many issues when trying to dim LEDs with conventional dimmers. The complex load that is the LED will cause most dimmers to misfire and cause erratic operation of the LEDs. LDT addresses these issues by utilising special patent pending technology, allowing the LED fixtures to dim just like conventional tungsten fixtures.

LED Lighting is the latest light source of choice with many options available and most venues globally are moving towards using them wherever possible. Civic Centres and local governments have directives to reduce costs and greenhouse gas emissions and LED lighting offers the solutions to help achieve these objectives, and of course LSC has the perfect solution to driving the LEDs

Features

  • 6 or 12 Channel 10A per circuit, self contained dimmer;
  • Channels can be configured for LED or conventional dimmer outputs;
  • 3-phase & 1-phase power input;
  • Huge reduction in electricity costs against standard tungsten light fittings;
  • Optional Remote button wall plates to recall dimmer memories;
  • Interfaces to panic switch or building management systems;
  • DMX Control

Suitable for:

  • Retrofitting into existing venues;
  • House Lighting;
  • Foyer Lighting;
  • Retail and commercial premises;
  • Cinema Lighting;
  • Outdoor Lighting;

Specifications

LDT Specifications

 
LDT 6
LDT 12
Channels
6 12
Max Load per channel
10Amps
Thermal / Magnetic Breakers
alt
RCBO (combined MCB+RCD) breaker per circuit
alt (optional)
Neutral Disconnect breaker per circuit
alt (optional)
Programmable Scenes (with individual fade times)
6
Programmable chases (with Speed control)
6
DMX-512A input with RDM functionality
alt
Architectural control with Wall Plates
alt
Selectable Fade curves per channel
2
Virtual Faders for Manual Control of outputs
alt
Full 512 channel soft-patch
alt
Three Phase or single phase operation
alt
Programmable Min and Max level per channel
alt
Bar graph LED level display for each channel
alt
Phase and DMX indicators
alt
Easy to install
alt
Dim or Relay modules for controlling all types of loads
alt
Output Connector Options
Hardwire (terminals)
Power Supply
Nominal 220-240 Volts. 3-phase star. 50-60Hz (Single phase operation possible)
Operating range typically 190-260V, 45-65Hz.
100-120 Volt models available on request
Power Input Connection
Hard wired models are provided with 5 screw terminals for input power.
Control Input
DMX512 (1990) or DMX512-A (E1-11) and RDM (E1-20)
Product Dimensions - H x W x D
420 x 430 x 120 mm 690 x 430 x 120 mm
16.5 x 17.0 x 4.7 inches 27.2 x 17.0 x 4.7 inches
Shipping Dimensions - H x W x D
 
440 x 450 x 150 mm 700 x 450 x 150 mm
17.3 x 17.7 x 5.9 inches 27.6 x 17.7 x 5.9 inches
Product Weight (Packed):
9.0 kg 15.0 kg
19.8 lb 33.0 lb
Shipping Weight:
 
9.0 kg 15.0 kg
19.8 lb 33.0 lb

Note: Other current ratings are available on request - indent order only. Minimum order quantities may apply.

Order Codes

LDT Order Codes

Order CodeLDT Dimmer Descriptions
LDT6 LDT 6ch x 10A Dimmer suitable for dimming mains-powered LED fixtures
LDT12 LDT 12ch x 10A Dimmer suitable for dimming mains-powered LED fixtures
 Wallplate Descriptions
RBR/1 Redback Wallplate single button, brushed aluminium finish for Australian/New Zealand/U.S. wallboxes.
RBR/1/UK Redback Wallplate single button, brushed aluminium finish for UK / European wallboxes.
RBR/2 Redback Wallplate two button, brushed aluminium finish for Australian/New Zealand/U.S. wallboxes.
RBR/2/UK Redback Wallplate two button, brushed aluminium finish for UK / European wallboxes.
RBR/6 Redback Wallplate six button, brushed aluminium finish for Australian/New Zealand/U.S. wallboxes.
RBR/6/UK Redback Wallplate six button, brushed aluminium finish for UK / European wallboxes.

Note: Other current ratings are available on request - indent order only. Minimum order quantities may apply.

Downloads

Downloads

 LDT6/10LDT12/10
Product Brochure
lsc_folder.gif
White Paper
lsc_folder.gif
Operator's Manual (Letter and A4 formats)
lsc_folder.gif
Software
lsc_folder.gif

Schematic

LDT Schematic

Click on schematic to download

Wallplates

Wallplates

For remote control of Redback Wallmount dimmer we offer a range of button contol panels called Redplates. There are several varieties available with 1, 2 or 6 buttons. The plates are finished in a brushed aluminium and are available in two physical sizes, one to fit Australian/New Zealand/U.S.A. standard wallboxes and the second to fit UK/European style wallboxes.
Each of the switches is back lit by an LED and the colour of the backlight can be selected in the initial setup of the wallplate. The backlight is set to dim when the switch is not active so that the button station can be seen in the dark. Any button that is active glows brighter.
Redplates connect directly to a Redback Wallmount dimmer via Cat5 cable and no other power or connections are required.
During setup, the buttons can be individually labelled with any text desired.
Each of the buttons replays a recorded memory on the dimmer that it is connected to including fade times. Two Button Redplate for the Australian/New Zealand/U.S. sized wallboxes and similar markets. 2 button Redplate Aus/NZ 

Six Button Redplate for the Australian/New Zealand/U.S. sized wallboxes and similar markets.

 6 button Redplate - Aus/NZ 

Six Button Redplate for UK and European sized wallboxes and similar markets.

UK Redplates

Images

LDT front panel view   LDT 6
     
LDT Controls   LDT Controls
     
     

Loading...

JoomlaWatch Stats 1.2.9 by Matej Koval