GenVI Logo
WALL-MOUNT

 

DIMMING / POWER DISTRIBUTION
The GVW takes the incredibly popular GenVI dimmer /distro technology and houses it in a compact footprint wallmount chassis for permanent installation into venues.

The GVW is available with either front mounted GPO outputs, for use with patchbays, such as the LSC Redback patch system, or with internal screw terminals for hard wired applications. The minimal height of the unit allows 4-6 GVW wallmount racks to be placed vertically on a wall to achieve a greater density of dimmers than with alternative products.
  GenVI Wall-mount angle view

In conjunction with the Redback patch system, up to 4 x GVW racks can be installed each side of the patchbay, allowing for 96 channels of dimming/power distro and patchbay to be located in an area of only 1.8m high x 1.7m wide. Additionally this combination allows all the user controls to be located within a comfortable working height (between 1.8m and 1m), whilst ensuring no cables touch the floor, thus removing the OH&S risks present with other solutions.

The hardwired variant has the terminals located on the rear section of the chassis, forming an installation frame which can be attached to the wall and all the supply and load cable terminations completed before the main body and electronics are installed. This method ensures far easier access when terminating cables, as well as ensuring no accidental damage to the rack's electronics by other trades.

Description


Equally at home in the lighting, sound and video markets, the new GVW uses TruPower allowing you to configure any of its outputs, in any combination, to be an 8 bit or 16 bit dimmer or a direct power relay channel. This enables GVW to dim traditional lamps or power moving lights, LED fixtures, video screens or audio power amplifiers—in fact anything where controlled power distribution or dimming is needed.

The colour touchscreen offers the user the ability to set each channel individually, control the outputs locally and view any external fault conditions that may be present.

As well as having local and DMX control, GVW is also RDM (Remote Device Management) enabled, allowing the user to change the DMX address of the unit, and view any fault conditions including over-temperature and loss of phase or DMX signal from any RDM controller.

Each circuit on the GVW is protected by an RCBO (combination MCB + 30mA RCD) protection on each circuit rated at either 10A or 25A. Optional Neutral disconnect MCBs can be provided where RCDs are not desirable.

The GVW offers a sophisticated rigger's control that can replay scenes or chases, each of which can be individually programmed in addition to a "DMX loss" scene that can be activated as an emergency back up on loss of a DMX signal. This emergency backup scene can be programmed via the front panel controls or via a snapshot of the DMX input signal.

Features

  • TruPower Dimmer & Power Distribution.
  • Combined MCB/RCD (RCBO) circuit breaker per channel.
  • Auto Power Mode - switches Relay channels On when DMX is applied and Off when DMX is no longer present.
  • Dimmer channels can be 8 bit or 16 bit.
  • RDM - Remote Device Management enabled.
  • Operates on Mains input voltages between 90V and 260V phase to neutral.
  • On-board Help Screens.
  • Visual Alarms for Phase fail, over temperature and loss of DMX.
  • PTFD Dimming (Pulse Transformer Fired Dimming).
  • Local Riggers Control.
  • Auto Fan Control (user defined).
  • Colour Touchscreen with simple and intuitive navigation.
  • Unistrut Hook Bracket available for simple mounting.

GVW is equally at home in any of the following environments:

  • Dimming Conventional, LED, Neon lights
  • Powering Moving Lights.
  • Powering LED Fixtures.
  • Powering Video Walls.
  • Powering Audio Systems

Specifications

GVW Specifications

 GVW12/10GVW6/25
Channels
12 6
Max Load per channel
10 Amps 25 Amps
Thermo-Magnetic Breakers
alt alt
RCD/GFI protection
alt alt
RCD/GFI Current Trip
30mA/Channel
DMX-512A input with RDM functionality
alt alt
Control Surface
3.2" color LCD with touchscreen.
Pre-heat (min) and Top set (max) levels per channel
alt alt
Remote monitoring and control via RDM
alt alt
Auto Power Mode - switches Relay channels On when DMX is applied and Off when DMX is no longer present
alt alt
Dimmer channels can be 8 bit or 16bit
alt alt
Visual Alarms for Phase fail, over temperature and loss of DMX
alt alt
PTFD Dimming (Pulse Transformer Fired Dimming)
alt alt
Local Rigger's Control
alt alt
Fan Control
Auto or user programmable speed
Colour Touchscreen with simple and intuitive navigation
alt alt
Dimming Curves
4
Operating Temperature range
0-40oC
Output Connector Options
/A 12 x 3-pin 10A Australian GPO style connectors 6 paired Australian GPO outlets (20A + 15A per channel)
/T Hardwired (terminals)
Power Supply
Nominal 100-240 Volts. 3-phase star with fully rated neutral. 50-60Hz
Operating range typically 90-260V, 45-65Hz.
Earthing System: TN-S
Power Input Connection
An M25 Nickel Plated Brass cable gland for installing power cable is supplied but not fitted.
Control Input
DMX512 (1990) or DMX512-A (E1-11) and RDM (E1-20) via right-hand side panel mounted 5-pin AXR in and thru connectors
Product Dimensions - W x D x H
490 x 270 x 250mm
19.3 x 11 x 9.8 inches
Shipping Dimensions - W x D x H
 
550  x 340  x 310 mm
21.7  x 13.4 x 12.2 inches
Product Weight:
21.5 kg / 47.3 lb 21.5 kg / 47.3 lb
Product Weight (Packed):
25 kg / 55 lb 25 kg / 55 lb
Shipping Weight (Australia)
25 kg / 55 lb 25 kg / 55 lb
Shipping Weight (Export)
25 kg / 55 lb 25 kg / 55 lb

Note: Other current ratings (such as 10A) are available on request - indent order only. Minimum order quantities may apply.

Order Codes

GVW Order Codes

Order CodeDescription
GVW12/10A GVW 12ch x 10A Dimmer/Power Distribution rack. Wall mount chassis with individual RCD/MCB per outlet.
12 x Australian GPO output connectors.
GVW12/10T GVW 12ch x 10A Dimmer/Power Distribution rack. Wall mount chassis with individual RCD/MCB per outlet.
Screw terminals on rear panel for power and load connections.
 
GVW6/25A GVW 6ch x 25A Dimmer/Power Distribution rack. Wall mount chassis with individual RCD/MCB per outlet.
6 paired Australian GPO outlets (20A + 15A per channel).
GVW6/25T GVW 6ch x 25A Dimmer/Power Distribution rack. Wall mount chassis with individual RCD/MCB per outlet.
Screw terminals on rear panel for power and load connections.
 
GVW/BRKT GenVI/APS Wallmount Unistrut bracket (pair)

Note: Other current ratings (such as 16A) are available on request - indent order only. Minimum order quantities apply.

Downloads

Downloads

 GVW12/10GVW6/25
Line Drawings
lsc_folder.gif
Consultants Specification
 lsc_folder.gif
Operator's Manual (Letter and A4 formats)
lsc_folder.gif
Software
lsc_folder.gif

Images

GVW front panel view   GVW 12ch hpm front 400
     
GVW side view   GVW R/H side view
     
GVW Unistrut Bracket   Unistrut mounting bracket
     
Unistrut bracket on rear housing   Unistrut mounting on GVW Rear housing
     
Side view of Unistrut mount on rear housing   Unistrut hanger V3 side view racking clearance
     

Loading...

JoomlaWatch Stats 1.2.9 by Matej Koval