GenVI Logo

 

GenVI Strap

GenVI Front

In acknowledgement of the changing demands of the marketplace, LSC has introduced a new intelligent dimming and power distribution unit, the GenVI Advanced Dimming System. The GenVI represents the sixth generation of dimmers designed by LSC over its 35 year history and is built on our extensive experience for today's complex lighting and power control.

Equally at home in the lighting, sound and video markets, for portable or permanent installation, the new GenVI Advanced Dimming System allows you to configure any of its outputs in any combination, to be an 8 bit or 16 bit dimmer or a direct power relay channel using TruPower. This enables GenVI to dim traditional lamps or power moving lights, LED fixtures, video screens or audio power amplifiers—in fact anything where controlled power distribution is needed.

The colour touchscreen offers the user the ability to set each channel individually, control the outputs locally and view any external fault conditions that may be present.

As well as having local and DMX control, GenVI is also RDM (Remote Device Management) enabled, allowing the user to change the DMX address of the unit, and view any fault conditions including over-temperature and loss of phase or DMX signal from any RDM controller.

Each circuit on the GenVI is protected by an RCBO (combination MCB + 30mA RCD) protection on each circuit rated at either 10A, 16A or 25A. Optional Neutral disconnect MCBs can be provided where RCDs are not desirable.

The GenVI Advanced Dimmer System offers a sophisticated riggers' control that can replay scenes or chases, each of which can be individually programmed in addition to a "DMX loss" scene that can be activated as an emergency back up on loss of a DMX signal. This emergency backup scene can be programmed via the front panel controls or via a snapshot of the DMX input signal.

Features

  • TruPower Dimmer & Power Distribution.
  • Combined MCB/RCD (RCBO) circuit breaker per channel.
  • Auto Power Mode - switches Relay channels On when DMX is applied and Off when DMX is no longer present.
  • Dimmer channels can be 8 bit or 16 bit.
  • RDM - Remote Device Management enabled.
  • Operates on Mains input voltages between 90V and 260V phase to neutral.
  • On-board Help Screens.
  • Visual Alarms for Phase fail, over temperature and loss of DMX.
  • PTFD Dimming (Pulse Transformer Fired Dimming).
  • Local Riggers Control.
  • Auto Fan Control (user defined).
  • Colour Touchscreen with simple and intuitive navigation.

GenVI is equally at home controlling any of the following loads:

  • Convential Filament Lamps.
  • Leading Edge dimmable LED globes.
  • Moving Lights.
  • LED Fixtures.
  • Video Walls.
  • Audio Systems.
  • Special Effects.

Specifications

GenVI Specifications

 GEN12/10GEN12/16GEN6/25
Channels
12 12 6
Max Load per channel
10 Amps 16 Amps 25 Amps
Thermo-Magnetic Breakers
alt alt alt
RCD/GFI protection
alt alt alt
RCD/GFI Current Trip
30mA/Channel
DMX-512A input with RDM functionality
alt alt alt
Control Surface
3.2" color LCD with touchscreen.
Pre-heat (min) and Top set (max) levels per channel
alt alt alt
Remote monitoring and control via RDM
alt alt alt
Auto Power Mode - switches Relay channels On when DMX is applied and Off when DMX is no longer present
alt alt alt
Dimmer channels can be 8 bit or 16bit
alt alt alt
Visual Alarms for Phase fail, over temperature and loss of DMX
alt alt alt
PTFD Dimming (Pulse Transformer Fired Dimming)
alt alt alt
Local Riggers Control
alt alt alt
Fan Control
Auto or user programmable speed
Colour Touchscreen with simple and intuitive navigation
alt alt alt
Dimming Curves
4
Operating Temperature range
0-40oC
Output Connector Options
/A 12 x 3-pin 10A Australian GPO style connectors N/A 6 paired Australian GPO outlets
(20A + 15A per channel)
/S 12 x Schuko Connectors N/A
/T Hardwired (terminals)
/W 2 x Wieland (Harting) 16-pin multi-pole connectors N/A
/X 2 x 19-pin Socapex multi-pole connectors N/A
Power Supply
Nominal 100-240 Volts. 3-phase star with fully rated neutral. 50-60Hz
(Single phase operation possible - 63A max)
Operating range typically 90-260V, 45-65Hz.
Earthing System: TN-S
Power Input Connection

Australian models are fitted with a three phase 1.2m H07 rubber 5 core x 6.0mm2 cable with 32A 5 pin Clipsal plug fitted as standard.

Hard-wired models are provided with 5 screw terminals for input power - no cable.

Export models are fitted with a three phase 1.2m H07 rubber 5 core x 10.0mm2 cable with bare ends.

Hard-wired models are provided with 5 screw terminals for input power - no cable.

Australian and Export models are fitted with a three phase 1.2m H07 rubber 5 core x 10.0mm2 cable with bare ends.

Australian models are fitted with a three phase 1.2m H07 rubber 5 core x 6.0mm2 cable with 40A 5 pin Clipsal plug fitted as standard.

Hard-wired models are provided with 5 screw terminals for input power - no cable.

Export models are fitted with a three phase 1.2m H07 rubber 5 core x 10.0mm2 cable with bare ends.

Control Input
DMX512 (1990) or DMX512-A (E1-11) and RDM (E1-20) via Front panel mounted 5-pin AXR in and thru connectors
Case
19" 3RU rackmount
Product Dimensions - W x D x H
483 x 300 x 132 mm
19.0 x 11.8 x 5.25 inches
Shipping Dimensions - W x D x H
 
580 x 500 x 210 mm
22.8 x 19.7 x 8.25 inches
Product Weight (Packed):
18.5kg 21kg 18.5kg
40.7lb 46.2lb 40.7lb
Shipping Weight (Australia)
18.5kg 21kg 18.5kg
Shipping Weight (Export)
18.5kg 21kg 18.5kg
40.7lb 46.2lb 40.7lb

Order Codes

GenVI Order Codes

Order CodeDescription
GEN12/10A GenVI 12ch x 10A Power Distribution rack. 3RU 19" rack mount with individual RCD/MCB per outlet.
12 x Australian GPO output connectors
GEN12/10S GenVI 12ch x 10A Power Distribution rack. 3RU 19" rack mount with individual RCD/MCB per outlet.
12 x Schuko output connectors
GEN12/10T GenVI 12ch x 10A Power Distribution rack. 3RU 19" rack mount with individual RCD/MCB per outlet.
Screw terminals on rear panel for power and load connections
GEN12/10W GenVI 12ch x 10A Power Distribution rack. 3RU 19" rack mount with individual RCD/MCB per outlet.
2 x Wieland output connectors
GEN12/10X GenVI 12ch x 10A Power Distribution rack. 3RU 19" rack mount with individual RCD/MCB per outlet.
2 x Socapex output connectors
 
GEN12/16S GenVI 12ch x 16A Power Distribution rack. 3RU 19" rack mount with individual RCD/MCB per outlet.
12 x Schuko output connectors
GEN12/16T GenVI 12ch x 16A Power Distribution rack. 3RU 19" rack mount with individual RCD/MCB per outlet.
Screw terminals on rear panel for power and load connections
GEN12/16W GenVI 12ch x 16A Power Distribution rack. 3RU 19" rack mount with individual RCD/MCB per outlet.
2 x Wieland output connectors
GEN12/16X GenVI 12ch x 16A Power Distribution rack. 3RU 19" rack mount with individual RCD/MCB per outlet.
2 x Socapex output connectors
 
GEN6/25A GenVI 6ch x 25A Power Distribution rack. 3RU 19" rack mount with individual RCD/MCB per outlet.
6 paired Australian GPO outlets (20A + 15A per channel)
GEN6/25T GenVI 6ch x 25A Power Distribution rack. 3RU 19" rack mount with individual RCD/MCB per outlet.
Screw terminals on rear panel for power and load connections

Downloads

Downloads

 GEN12/10GEN12/16GEN6/25
Product Brochure
pdf logo
Line Drawings
lsc_folder.gif
Operator's Manual (Letter and A4 formats)
lsc_folder.gif
Software
lsc_folder.gif

Images

GenVI front panel view   GenVI Front Panel
     
GenVI diagonal view   GenVI Angle View
     
GEN12/10A Rear Panel   GEN12/10A Rear Panel
     
GEN12/10S Rear Panel   GEN12/10S Rear Panel
     
GEN12/10T Rear Panel   GEN12/10T Rear Panel
     
GEN12/10W Rear Panel   GEN12/10W Rear Panel
     
GEN12/10X Rear Panel   GEN12/10X Rear Panel


Loading...

JoomlaWatch Stats 1.2.9 by Matej Koval