|
The new EKO wall mount installation dimmer is available in 6, 12 and 24 channel versions with a choice of output capacities. The EKO dimmers incorporate a cleverly designed installation frame that can be fixed in position without the dimmer being present. Load and control screw terminals on the frame allow for building wiring to be terminated in a clear and unhindered manner.
When the installation is ready for commissioning, the dimmer can be hung on the installation frame and output circuits then plugged into the special screw terminals – the 24 channel dimmer can easily be installed onto the frame and made fully operational in under 5 minutes!
After installation internal electronics can be easily accessed through the lockable hinged front door. The door has been designed with reversible hinges and lock allowing the dimmer to be customized to suit the installation environment.
EKO Features
Unique Functionality
- One lighting system with Push Button AND Live Console Control. Each individual channel on the EKO can be set to DMX only, Architectural only, or the unique Auto switch mode for dual control.
- Auto DMX/Architectural switching, ensures that the EKO always works as expected. Once DMX is disconnected the system automatically changes back to wallplate control after a preset time delay of 30 seconds to 5 minutes.
- Easy Installation. The EKO is provided with a separate installation frame to allow the mechanical mounting and electrical connections to be completed without the dimmer rack being onsite. This ensures no damage from 3rd party tradespeople to the dimmer, as well as helping with cash flow, as the frame can be purchased months ahead of the dimmer rack.
- Max Level Setting - Save energy, save lamp life, save lamp maintenance.
- Intelligent Power up at last known state. The system returns to the last lighting state after a short term power failure. If the power fail is longer than 2 hours, then the unit powers up with all channels off.
Dimmer module
- Low profile installation dimmer in 6, 12 and 24 channel versions.
- 13 Amp or 25 Amp output capacity per channel.
- Designed for quick installation and termination.
- 100% duty cycle rated across all channels simultaneously.
- Variable speed Fan cooling.
Control module
- Graphical LCD panel with touch screen operation.
- DMX512A compatible with link thru connector and input termination switch.
- CE and Ctick approved.
Houston is a Windows PC application that allows for remote monitoring of all LSCnet enabled products. This includes the TEKO and e24v2 portable touring dimmers, the EKO installation dimmers and the ePlate wall controllers.
Any operational faults, such as phase failure, loss of DMX, over temperature etc, are sent over the Cat5 cable from all of the devices to one or more PC's running the software. The user is immediately notified of a fault when the normally Green status indicator starts flashing Red. A quick glance at the screen then gives all the detailed information about the device affected and the exact nature of the fault.
This information is invaluable for fast diagnostics of any problems in all situations. Large stadium concerts or film schools with dimmer racks located in multiple positions can now see what is happening from a central location. Installers can see the status of a remote venue, such as a school or a church, form their office, via a Wi-Fi link or an internet connection.
Houston even keeps a permanent log of all system events for later viewing. These are stored with the date and time of the fault, allowing further diagnostics or a problem, even if it is not reported until weeks later.
| EKO324 | EKO312 | EKO612 | EKO606 |
|
Number of Dimmer channels
|
24
|
12
|
12
|
6
|
|
Channel output rating
|
13 Amps
|
25 Amps
|
|
Channel output connector type
|
4mm2 screw terminal
|
10mm2 screw terminal
|
|
Channel MCB type
|
1 Pole
|
|
Channel MCB breaking capacity
|
6000 Amps
|
|
RCD protection option (Qty)
|
Yes (2)
|
Yes (1)
|
Yes (2)
|
Yes (1)
|
|
Current control technology
|
Yes
|
|
Dimmer curve selection per channel
|
Yes
|
|
Scene storage
|
Yes
|
|
Power switching component
|
Triac
|
|
Inductor rise time
|
200us
|
|
Channel output mimic LEDs (Qty)
|
Yes (24)
|
Yes (12)
|
Yes (6)
|
|
DMX data and LSCNET indicator LEDs
|
Yes
|
|
Operational STATUS indicator LED
|
Yes
|
|
DMX512 input and link thru connector
|
Yes
|
|
DMX512 input termination switch
|
Yes
|
|
Number of cooling fans
|
2
|
1
|
2
|
1
|
|
Fan cooling control
|
Variable
|
|
External software upgradable
|
Yes
|
|
Power up in last known state
|
Yes
|
|
50/60Hz frequency auto-select
|
Yes
|
|
220V three-phase current (per phase)
|
104 Amps
|
52 Amps
|
100 Amps
|
50 Amps
|
|
Chassis style
|
Wall mount installation dimmer with hinged front door |
|
Dimensions (mm)
|
480W x 824H x 135D
|
480W x 549H x 135D
|
480W x 824H x 135D
|
480W x 549H x 135D
|
|
Weight (kg)
|
35
|
27
|
30
|
21
|
|
Construction
|
Made from aluminium and corrosion resistant steel finish in powdercoat with rear screened polycarbonate labels. |
| EKO |
|
Product Brochure
|
|
|
Product Key Benefits
|
|
|
Operators Manual
|
|
|
EKO small drawing (DXF)
|
|
|
EKO large drawing (DXF)
|
|
|
EKO small drawing (PDF)
|
|
|
EKO large drawing (PDF)
|
|
|
EKO Install Frame large drawing (PDF)
|
|
|
EKO Install Frame small drawing (PDF)
|
|
Houston software trial version
|
|
|
