|
Data Distribution Products
LSC Lighting Systems has developed a
reputation for being at the forefront of DMX512 technology through
their DMX Distribution products which include DMX512 data
splitters/amplifiers, DMX512 mergers, data crosspatch routers,
isolated data input and output wall boxes and system power supply
units. All products form basic building blocks that can be
assembled into a DMX data network tailored to the requirements of your venue.
|
 |
|
|
The Delta DMX512 data splitters take a single DMX512 input
data stream and provide five DMX512A compatible outputs.
There are two versions of the Delta data splitter; a 19"
(1RU) rackmount model and a portable model that can be installed
on a wall, truss mounted or simply placed on any flat surface.
 Single
DMX512A
Compatible input and thru connectors with input terminator.
Five DMX512A
Compatible outputs.
Universal AC power supply.
|
Click for Full Details |
|
|
The DMiX is a stand-alone DMX512 - 2 into 1 merge unit
designed for 19" Rackmount installation. The DMiX
combines data from two separate DMX512 inputs and provides a
single merged DMX512 data output on a Highest-Takes-Precedence (HTP)
basis, allowing two controllers to control the same fixture.
Two DMX512A
Compatible inputs, each with thru connectors and input terminators.
Single DMX512A
Compatible merged output.
Universal AC power supply.
|
Click for Full Details |
|
The DMXchange is a data
crosspatch controller that will accept up to six DMX512 inputs and
crosspatch to twelve DMX512 outputs. It has a built-in LCD Display and
function buttons, that allow you to configure the crosspatching and
electronically label the data paths.
Six DMX512A
Compatible inputs, each with input terminator switch.
Twelve DMX512A
Compatible outputs.
Universal AC power supply. |
Click for Full Details |
|
|
A low cost alternative to the ISOnode,
where the need for an isolated input into a DNA network is not
required. DNA IN are passive devices that contain no
electronics and are supplied with the standard wall mount box and
prewired with an internal DNA screw terminal loom.
Available
with 1, 2 or 3 DMX input connectors.
Internal
screw terminal block for quick connection of DMX512 cable. |
Click for Full Details |
|
|
The new DNANET products introduce 10baseT Ethernet protocol to
the LSC DNA range of DMX512 distribution products. Housed
in the same mounting enclosure as the ISOports and ISOnodes, DNANET
products allow DMX data routing over Ethernet.
DMX512A
to 10baseT Ethernet Encoder or Decoder.
Compatible with DMX512A,
Art-Net and RDM. |
Click for Full Details |
|
|
The ISONODE is an intelligent, electrically isolated DMX512
input module that connects an external DMX controller into the
internal DMX512 network. The ISONODE automatically
detects and switches between active DMX512 network data or input DMX
data.
Single
Front panel input connector allows access to the internal DMX512
network.
Front
panel power and status indicators.
|
Click for Full Details |
|
|
ISOPORTS are a wall mounted
electrically isolated and buffered DMX512 outlet module. The
ISOPORT is available in three models, providing up to 1536
channels of DMX512 control at any point.
Available
with 1, 2 or 3 DMX output connectors.
Front
panel power and status indicators. |
Click for Full Details |
|
|
The ISOPOWER is a 24VDC power source for the ISOPORT and
ISONODE network modules. There are two installation
versions of the ISOPOWER. A 19" 2RU rackmount
model that can power upto 32 network modules and and a wall mount
model that can power upto 12 network modules.
Available
in 19" rackmount or wall mount style.
Universal
AC power supply.
|
Click for Full Details |
|
|
|
